← All guides
Public tenders

The tender deadline moved again: how to read EU change notices

Many "new" tenders are older competitions that the buyer has changed. Learn to find the original notice, list every change in order and see which ones alter the work, the price or the deadline.

By Evolc6 min read
A large cream paper sheet on an ivory desk with seven overlapping paper slips in cream, charcoal, yellow, olive and mauve clipped along its top edge, beside a small brass desk calendar with blank pages.
Editorial illustration created with AI.

If a public tender looks newly published, check whether it is really new. Many notices are change notices: corrections to an earlier notice for the same competition. Find the original, list every change in order, and read what each one altered: the deadline, the estimated value, the length of the contract or the documents themselves. Then confirm the current terms on the buyer's own portal. A chain of extensions tells you the buyer has been revising its documents. It does not tell you how many suppliers will bid or who will win.

This guide uses two Czech hospital software purchases published on TED (Tenders Electronic Daily), the EU's website for public contracts above certain values. If you are new to tender notices, start with how to read an EU public tender notice.

1. Check whether the notice replaces an earlier one

A change notice has its own number and publication date, so search results and tender lists often show it as if it were a fresh opportunity. On TED, open the notice and look for a section called Changes. It names the notice being changed and describes what changed. In the machine-readable version of the notice (the XML file, linked from the notice page), the same reference sits in a field called ChangedNoticeIdentifier.

Lists built from TED can show the newest version as the publication date, and Evolc Signals' public tenders page does. The eHealth tender of Psychiatrická léčebna Petrohrad, a psychiatric hospital in Czechia, reads "Published 21 Oct 2026". That is the date of the latest change. The competition itself opened in July.

2. Follow the chain back to the original

Each change notice points to the one before it. Follow the references until you reach a notice with no Changes section. That is the original call for tenders. Write down each notice's publication date and the deadline it gives.

Seven cream paper cards standing in a row on a wooden ruler, each slightly taller than the last, joined by a thin charcoal thread; the last card has a golden yellow folded corner.
Each change notice points back to the one before. Follow the thread to the first card before you trust any date on the last one.

3. Read what changed, not only the new date

Every change notice carries a reason from a fixed EU list. The common ones are "Buyer correction" (the buyer fixed its own mistake), "Information updated" and "Information now available". The notice also says whether the procurement documents changed. A deadline-only change and a rewritten contract carry the same label, so read the description.

The sixth Petrohrad change is a good example. It describes changes to the draft contract, the technical specification and the price calculation, and a new draft contract for service after the warranty. It adds a reserved change: a clause, agreed in advance, that lets the buyer order extra work later without a new tender. Here that is paid development during the warranty period of up to 250 hours. The notice says the deadline is extended because the changes "may widen the circle of possible suppliers", citing section 99(3) of the Czech public procurement act.

The same notice explains the duration. The 140 days now cover only delivery until the buyer accepts the system. After that come 60 months of warranty and standard service, then five years of post-warranty service. By our arithmetic, 140 days plus those ten years gives the 3,792 days the September change had shown. The commitment did not shrink. The notice now describes it differently.

Two more points from this chain. First, the September change removed the estimated value, so the current notice shows none. Use the original estimate with care and check the documents for the current figure. Second, the text of that September change lists the deadline the wrong way round ("instead of 15.10.2026, read 11.09.2026"), while its structured deadline field says 15 October. When the description and the fields disagree, check the buyer's documents.

Two cream paper cards side by side: the left one holds a single narrow olive strip under a brass clip, the right one is buried under a thick stack of olive strips and folded inserts.
A one-line correction and a rewritten contract can both arrive as a "change notice". Read how much was altered before deciding what to redo.

4. Treat small corrections as part of the price

Not every change is large, but small ones can still matter. Fakultní nemocnice Ostrava, a university hospital, is buying a common data environment, a shared online workspace for project documents. Its original notice of 23 October 2026 gave an estimated value of CZK 6,966,630. Three days later a buyer correction said the value had been stated wrongly and replaced it with CZK 4,644,420.

On 17 November a second correction reported that the buyer had fixed an obvious error in the formula of the total row in the price table, an annex to the tender documents. It moved the deadline from 24 to 25 November at 10:00. Offers in this competition are also scored on price alone. A supplier who filled in the old price table could submit a wrong total. Download the corrected annex and redo the calculation.

5. Watch the buyer's portal, not only TED

TED publishes a notice a few days after the buyer sends it. In the Petrohrad chain, notice 589279-2026 was dated by the buyer on 25 August but appeared on TED on 26 August, the day the previous deadline expired at 09:00. Notice 597290-2026 did the same on 31 August. Someone relying on TED alone would have learnt of the extension on the closing day.

The questions suppliers ask and the buyer's answers, called clarifications, are published on the buyer's e-procurement portal, not on TED. Petrohrad's notices link to its profile on Tender arena, a Czech tendering platform. The notices number the clarifications differently (one cites "clarification 7", a later one "clarification/change 6"), so read the clarifications themselves rather than counting notices. If you plan to bid, register on the portal so that changes reach you directly.

Keep the interpretation modest. Several extensions show that the buyer kept revising its documents, sometimes after questions from suppliers. They do not show how many offers it will receive, whether any supplier complained, or who will win. Those facts appear only later, in the contract award notice.

Ask your assistant to rebuild a tender's history

Prompt to use with your assistant

Help me check the history of this public tender before I plan a bid.
Notice: [paste TED link]

1. Open the notice and its XML version. If it has a Changes section or a ChangedNoticeIdentifier, follow each reference back until you reach the original call for tenders.
2. Make a table: notice number, publication date on TED, date sent by the buyer, deadline for offers, change reason, and what changed.
3. Flag every change to the estimated value, duration, start date, award criteria, contract terms or price sheet.
4. Point out any place where the change description and the structured fields disagree.
5. Give me the link to the buyer's portal and list what I must download again.

Link each finding to its source notice. Separate facts from your interpretation. Do not guess how many suppliers will bid or who will win.

Try it now: open Evolc Signals' public tenders, pick a contract in your field and open the full notice on TED. If it has a Changes section, follow it back to the original before you read anything else, then download the current documents from the buyer's portal.